MRV Communications LX-4000 Series Información técnica descargar pdf (Pagina 121)

100

101

4-10 Configuring SFTP

LX Series Configuration Guide

Example Config:0 >>sftp password ottos_secret

X To generate an SFTP Public/Private Key

This command lets you avoid entering a password every time

you log in. You can use one password for all the units in your

network, but you can use that password only from the station

where you configured the key. The key identifies a unit on the

network to all its available clients.

L If you generate an SFTP Public/Private key and create

a passphrase, you can configure a password if you

want, but it is not required.

Use this command to generate a SFTP Public/Private Key pair.

Syntax Config:0 >>sftp keygen [rsa|dsa|rsa1] bits

[1024|2048]

Examples Config:0 >>sftp keygen rsa bits 1024

Config:0 >>sftp keygen rsa1 bits 2048

X To change the SFTP Key Passphrase

L If you use an SFTP key to boot the configuration from

the network, the administrator must not set a

passphrase on this key. If the administrator does so,

the LX will prompt you for the passphrase during

bootup on the DIAG port, blocking the boot cycle.

L You must generate the SFTP Key before using this

command.

Use this command to change the SFTP private key using a

Passphrase.

Syntax Config:0 >>sftp keygen passphrase

To create a new SFTP passphrase, do the following:

1. Enter sftp keygen passphrase and press <Enter>. The

following messages appear:

Generating public/private rsa key pair

Enter new passphrase (empty for no passphrase):

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 691 692

Comentarios a estos manuales

Sin comentarios

MRV Communications LX-4000 Series Información técnica Pagina 121

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores MRV Communications LX-4000 Series