MRV Communications AE092FCAHA Manual de instrucciones descargar pdf (Pagina 22)

1100

223

Installation procedure

Fig 2

AE182FCAHA

AE092FCAHA

Installation of indoor unit

lThe unit shall be installed according to the

specifications to resist to strong wind and

earthquake. Improper installation may cause

dangers of unit falling down etc.

After selecting the unit installation location, proceed the following steps:

1. Drill a hole in the wall and insert the connecting pipe and wire through a PVC wall-through tube

purchased locally. The wall hole shall be with a outward down slope of at least 1/100. (See

Figure 2)

2. Before drilling check that there is no pipe or reinforcing bar just behind the drilling position.

Drilling shall avoid at positions with electric wire or pipe.

3. Mount the unit on a strong and horizontal building roof. If the base is not firm, it will cause

noise, vibration or leakage (see Figure 6).

4. Support the unit firmly.

5. Change the form of the connection pipe, connection wire and drain pipe so that they can go

through the wall hole easily.

lThe unit shall be installed at locations enough

to support the unit. If not, the air conditioner

may fall down and cause personal injury.

Figure showing installation dimensions: (unit:mm)

! Warning

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

Sin comentarios

MRV Communications AE092FCAHA Manual de instrucciones Pagina 22