MRV Communications AE092FCAKA Especificaciones descargar pdf (Pagina 27)

451-0308

Installing the LX Series

NOTE: The LX will run with only one DC power feed connected. The

second input is provided for redundant system power, which is

used in high reliability installations.

6. Attach the clear plastic safety guard to the terminal blocks. (The clear

plastic safety guard is provided with the LX kit.)

Modem Port (Optional)

The modem port is a V.90/K56flex Kbps optional factory installed modem on

the LX Series. The modem port allows you to dial in to or out of the LX. If the

modem is present, connect your phone line to the modem’s RJ11 connector. If

the modem is not installed, the RJ11 connector will not be present on the rear

of the unit. In LX-4048M models, the modem port is on the front of the unit.

The Modem port number is as follows for LX models:

• LX-4008M - port number 9

• LX-4016M - port number 17

• LX-4032M - port number 33

• LX-4048M - port number 49

At the InReach:0>> prompt, enter the show port async 33 modem

command to display a screen containing the LX-4032M modem port fields.

Powering On

The Power On Self Test (POST) starts when you apply power to the LX Series

unit. The port status LEDs flicker and the FLT LED remains on while the test

is running (this may take only a few seconds). If the unit passes the POST

test, the FLT LED extinguishes, and the OK LED turns green. If there is a

failure, the FLT LED stays on, and the port status LEDs begin flashing an

error code. Refer to Appendix B for an explanation of the codes.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 68 69

Sin comentarios

MRV Communications AE092FCAKA Especificaciones Pagina 27